School surveillance cameras installed

    The school has opened for 3 days, the safety of the school has been the most concerned about users or parents, in addition to the security personnel to match in place, security monitoring is still not less.Choosing a suitable surveillance camera for school security can add double protection.

    Schools can install surveillance cameras. Users can choose surveillance cameras with more than 2 million pixels as the standard configuration, with a resolution of 1920X1080, to meet the monitoring needs of school education industry. Night vision function For schools with poor vision at night, infrared night vision function can make up for poor vision and weak visual sensitivity at night.

    The steps for installing school surveillance cameras are as follows:

1. Take out the support, prepare tools and parts: plug, screws, screwdriver, hammer, electric drill and other necessary tools;According to the predetermined installation position, check the size and model of the expansion plug and self-tapping screw, test whether the screw of the bracket and the screw of the camera base are suitable, whether the embedded pipeline interface is properly handled, test whether the cable is smooth, and then enter the installation program.

2. Take out the camera, and confirm that it is firmly fixed, then switch on the power supply, connect the host or adjust the focal length of the aperture using the monitor or small TV on site.

3. Take out the support, plug, screw, screwdriver, hammer, electric drill and other tools, and install the support according to the predetermined position.After checking firmly, install the monitoring camera in accordance with the direction of the instructions;

4. If you need to install the shroud, install the shroud directly from here after step 2.

(1) Open the upper cover and rear baffle of the cover;

(2) Pull out the fixed metal sheet and fix the camera;Wireless surveillance camera

(3) Install the power adapter into the cover;

(4) Reset the upper cover and rear baffle, straighten out the cable, fix it, and install it on the bracket.

5. Insert the BNC plug of the video cable into the video cable socket and ensure that the video cable is securely fastened.

6. Insert the power output plug of the power adapter into the power socket of the monitoring camera and ensure that it is secure.

7. Connect the other end of the cable to the control host or monitor (TV) and ensure it is secure.

8. Power on the monitoring host and camera, and adjust the camera Angle to the preset range through the monitor.

9. If you want mobile phone monitoring, you can use your smartphone to scan the QR code on the instruction manual matching the monitoring camera, download the corresponding monitoring camera APP, and perform remote monitoring of the mobile phone monitoring camera according to the next step and the next step.