How do wireless cameras connect to the Internet

    Surveillance cameras in the process of security monitoring to protect the user's personal and property safety, to meet the needs of property protection in addition to security personnel. Surveillance camera or wireless network camera in the use of the process because of various factors or can not be connected to the network situation, then you can deal with this?

1. Power supply: first check whether the wireless network camera is powered on normally and whether the indicator or infrared light is on.

2. Restore factory Settings: Press the machine reset button for 8-10 seconds.

3. Test range: the wireless network camera and router should be kept within 2 meters during the test and returned to the original position after normal testing.

4. Network connection mode: Confirm to use the following methods to connect the wireless router WIFI, mobile phone sharing hotspot,

5. WIFI name (password) : Chinese characters and special characters cannot be used, and the password length is limited to 14 characters.

6. Memory expansion: Do not install extended memory during the test.

7. 5GWIFI: 5G network is not supported.

8. Hidden WIFI: Hidden WIFI is not recognized.

If still not connected: use network cable connection, router connect network cable to the camera.

1. Ensure that the network cable indicator on the back of the wireless network camera is steady green and blinking orange. 2. The phone and camera must be on the same WIFI network.

3. Connect for 1-2 minutes and then try the APP.